Product Description
Weak Link P20
$0.00
The Weak Link helps protect pipe during installation. It is designed to yield before reaching the pipe’s standard safe pull strength to protect the pipe from overload. The Weak Link P20 is designed to yield at a force of approximately 20% less than normal tensile strength of PE pipe. It is available in both yellow medium density PE pipe and black high density PE pipe.
Related Cumberland Products
Standard valves are drilled with #34 (7” WC / 50 CFH) orifice size, but other size and port options are available upon request.
Add to Quote 
Using the Venturi effect, this tool aggressively suctions gas from the ground. It generates 242” of simultaneous pick-up power with no moving parts, and can be used in less than 2” diameter holes at any depth.
VIDEO – View product in action! / Gas Tornado Operating Instructions
Add to Quote 
The Pulling Head helps protect pipe during installation. It fuses to the Weak Link and leads the new polyethylene pipe through the trench or bore.
Add to Quote 
The Mud Plug helps protect pipe during installation. It will keep debris out of the pipe during pull back if the Weak Link is compromised.
Add to Quote Additional Cumberland Products
The guards provide protection for meters, regulators, and areas prone to snow and ice build-up. The Meter & Regulator Ice Guards are available up to 20” wide. Customized guards are available.
Add to Quote 
These vents attach to regulator relief piping to keep them clear of obstructions or snow and ice build-up.
Add to Quote 
These mechanically enhanced plungers have an ergo or standard handle design in either a heavy duty or utility version. The plunger rods are made of steel or fiberglass, and have a 52” probe depth. Designed with an oversized tip to make retraction easier. Handle coated with PVC for up to 10,000 volt shock resistance.
Add to Quote 
Each vise grip style clamp has one reducing combination per model, and secures PE pipe during the electrofusion process. Sampling of combinations and standard jaw inside dimensions are listed. Note: Any 2" and smaller combination is available.
Add to Quote 
These mechanically enhanced ground rods penetrate hard soils and even frozen ground. Each rod comes with a stop plate at 11-1/2” to prevent over penetration. 25” tool length. Designed with an oversized tip to make retraction easier. Handle coated with PVC for up to 10,000 volt shock resistance.
VIDEO - View product in action!
Add to Quote
Standard valves are drilled with #34 (7” WC / 50 CFH) orifice size, but other size and port options are available upon request.
Add to Quote